Please enter your location, or select our default site experience.
There are # nearby branches to serve you.
Select your preferred branch below, or search again for another location.
Please wait while you are redirected...
In an effort to better serve our customers, this content is designed to be tailored to our individual service regions. Please select a branch to view updates in your area.
Please enter your location, or select our default site experience.
Searching... Please enter a location! Sorry, there are no results found near this location. Please try again.

Our default site experience provides general information and content for every region served.

Phaseout of R-22

As you are aware, R-22 has been on a phase out schedule for several years.  January 1, 2020 begins a new phase since it will no longer be produced.

Here is what you need to know.

  • Beginning January 1, 2020, it will no longer be permitted to produce or import R-22 into the United States.
  • After January 1, 2020 only recycled, AHRI-700 certified reclaimed product or virgin R-22 sold from existing stockpiles can be used for servicing existing equipment.
  • After 2020, the servicing of systems that use R-22 or blends containing HCFC-22 will rely on recovered or stockpiled quantities. It is difficult to predict when these supplies will run out. Supplies may be available until almost all equipment containing R-22 is retired.

Because the demand for R-22 is greater than what is being produced, retrofitting is the next option. Retrofit may be a good option if the R-22 system has leaks and needs service but is no longer under warranty. Also, cost conscious customers may prefer to do a retrofit instead of replacing the system with a new R-410A system.

MO99

Freon™ MO99 (R-438a) is the closest match to R-22 of all “no oil change” replacement refrigerants. It is compatible with all traditional and new lubricants. Learn more here.

Freon™ MO99 matches R-22 in terms of capacity and efficiency in most systems, but with a significantly lower discharge temperature that may prolong the life of the compressor. MO99 is compatible with mineral oil and POE oil providing a quick, cost-effective R-22 replacement. Once a system is running on MO99, it can be topped off during service without removing the entire refrigerant charge. For complete details, please refer to the M099 Retrofit Guidelines.

For most R-22 systems, when retrofitting to Freon™ MO99, all you need to do is recover the R-22, replace critical seals, charge refrigerant, restart and monitor for leaks, label the system with a Freon™ MO99 retrofit label, and you’re done. R-22 replacement can’t get any easier.

This pamphlet from the EPA is a good guide for what technicians and contractors need to know about the phase out.